Home › Audio/Visual/Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for SD)

NAVIGATION SYSTEM (for SD) > CD Sound Skips

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK CD


    I100151
  1. Check the CD.

    OK:
    The CD is clean.

    NOTICE:
    Do not use a conventional record cleaner or antistatic preservative.

    HINT:
    If the CD is dirty, clean the CD by wiping the CD surface radially with a soft cloth.



NG
CLEAN CD
OK


2.CHECK CD


    I100152
  1. Check that the CD is not deformed or cracked.

    OK:
    No deformation or cracks in the CD.



NG
CD IS FAULTY
OK


3.CHECK OPERATION OF ANOTHER CD
  1. Check using another CD.

    1. Check if the problem recurs using another CD.

      OK:
      The problem does not occur.



NG
Go to step 4
OK

CD IS FAULTY 

4.CHECK NAVIGATION RECEIVER ASSEMBLY
  1. Check the navigation receiver assembly installation condition.

    1. Check that the navigation receiver assembly is properly installed.

      OK:
      The navigation receiver assembly is properly installed.



NG
REINSTALL NAVIGATION RECEIVER ASSEMBLY
OK

REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)