Home › Audio/Visual/Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for DVD)

DTC    B15A0    LAN Master Malfunction

DTC    B15AD    Navigation Processor Malfunction

DTC    B15B3    Radio Tuner Malfunction

DTC    B15B7    Bluetooth Module Malfunction

for Preparation Click here


DESCRIPTION

This DTC is stored when a malfunction occurs in the navigation receiver assembly.

DTC Code
DTC Detection Condition
Trouble Area
B15A0
When either condition below is met:
  1. Bus malfunction
  2. Sub-microprocessor malfunction
Navigation receiver assembly
B15AD
When either condition below is met:
  1. A short to ground, short to +B or open occurs in the gyro signal circuit
  2. Gyro sensor malfunction
B15B3
Tuner communication error
B15B7
"Bluetooth" module malfunction

INSPECTION PROCEDURE

1.CHECK FOR DTC
  1. Clear the DTCs (Click here).

  1. Check for DTCs and check if the same trouble occurs again.

    OK:
    No DTCs are output.



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
OK

USE SIMULATION METHOD TO CHECK (Click here)