Home › Audio/Visual/Telematics › NAVIGATION / MULTI INFO DISPLAY › NAVIGATION SYSTEM (for DVD)

DTC    B1582    Map Disk Reading Malfunction

for Preparation Click here


DESCRIPTION

This DTC is stored when the navigation receiver assembly cannot read the map disc.

DTC Code
DTC Detection Condition
Trouble Area
B1582
  1. Player error
  2. Scratches or dirt on the disc
  3. Access to an invalid address due to software error
  1. Map disc
  2. Navigation receiver assembly

INSPECTION PROCEDURE

1.CHECK MAP DISC


    I100152
  1. Check that the map disc is not deformed or cracked.

    OK:
    No deformations or cracks in the map disc.



NG
Go to step 4
OK


2.DISC CLEANING


    I100201E04
  1. Disc cleaning

    1. If dirt is on the disc surface, wipe it clean with a soft cloth from the inside to the outside in a radial direction.

      NOTICE:
      Do not use a conventional record cleaner or antistatic preservative.


NEXT


3.CHECK FOR DTC
  1. Clear the DTCs (Click here).

  1. Check for DTCs and check if the same trouble occurs again.

    OK:
    No DTC is output.



NG
Go to step 4
OK

END 

4.REPLACE MAP DISC
  1. Replace the map disc.

  1. Clear the DTCs (Click here).

  1. Recheck for DTCs and check if the same trouble occurs again.

    OK:
    No DTC is output.



NG
REPLACE NAVIGATION RECEIVER ASSEMBLY (Click here)
OK

END