AIR COOLED OIL COOLER > REMOVAL |
| 1. REMOVE FRONT BUMPER ASSEMBLY |
Remove the front bumper (Click here).
| 2. DISCONNECT NO. 1 OIL COOLER INLET HOSE AND NO. 1 OIL COOLER OUTLET HOSE |
![]() |
Remove the bolt and move the water by-pass pipe so that the 2 oil cooler hoses can be disconnected.
Disconnect the No. 1 oil cooler inlet hose and No. 1 oil cooler outlet hose from the transmission oil thermostat.
Disconnect the 2 hoses from the oil cooler tube to remove them.
| 3. REMOVE OIL COOLER ACCESSORY ASSEMBLY |
![]() |
Disconnect the 2 hoses from the No. 2 oil cooler tube.
Detach the claw to open the No. 1 flexible hose clamp.
Disconnect the 2 hoses from the oil cooler tube and remove the oil cooler accessory assembly.
| 4. REMOVE OIL COOLER TUBE |
![]() |
Remove the 2 bolts and oil cooler tube.
| 5. REMOVE COOLER CONDENSER ASSEMBLY (AIR COOLED OIL COOLER) |
Remove the cooler condenser (Click here).
| 6. REMOVE NO. 2 OIL COOLER TUBE |
![]() |
Disconnect the No. 2 oil cooler inlet hose and No. 2 oil cooler outlet hose from the cooler condenser.
Remove the bolt and No. 2 oil cooler tube together with the 2 oil cooler hoses.
Remove the No. 2 oil cooler inlet hose and No. 2 oil cooler outlet hose from the No. 2 oil cooler tube.