POWER WINDOW REGULATOR MOTOR > INSPECTION |
| 1. INSPECT FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH |
![]() |
Check the operation of the regulator motor.
Apply battery voltage to the regulator motor and check the operation of the regulator motor.
| Measurement Condition | Motor Condition | Specified Condition |
| Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 1, 4 and 10 | Auto | Motor gear rotates clockwise |
| Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 1, 4 and 7 | Motor gear rotates counterclockwise | |
| Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 1 and 10 | Manual | Motor gear rotates clockwise |
| Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 1 and 7 | Motor gear rotates counterclockwise |
| 2. INSPECT FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY RH |
![]() |
Check the operation of the regulator motor.
Apply battery voltage to the regulator motor and check the operation of the regulator motor.
| Measurement Condition | Motor Condition | Specified Condition |
| Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 1, 4 and 7 | Auto | Motor gear rotates clockwise |
| Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 1, 4 and 10 | Motor gear rotates counterclockwise | |
| Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 1 and 7 | Manual | Motor gear rotates clockwise |
| Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 1 and 10 | Motor gear rotates counterclockwise |
| 3. INSPECT REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY LH |
![]() |
Check the operation of the regulator motor.
Apply battery voltage to the regulator motor and check the operation of the regulator motor.
| Measurement Condition | Specified Condition |
| Battery position (+) → Terminal 1 Battery negative (-) → Terminal 2 | Motor gear rotates clockwise |
| Battery position (+) → Terminal 2 Battery negative (-) → Terminal 1 | Motor gear rotates counterclockwise |
| 4. INSPECT REAR POWER WINDOW REGULATOR MOTOR ASSEMBLY RH |
![]() |
Check the operation of the regulator motor.
Apply battery voltage to the regulator motor and check the operation of the regulator motor.
| Measurement condition | Specified Condition |
| Battery positive (+) → Terminal 2 Battery negative (-) → Terminal 1 | Motor gear rotates clockwise |
| Battery positive (+) → Terminal 1 Battery negative (-) → Terminal 2 | Motor gear rotates counterclockwise |