Home › Power Source / Network ยท NETWORKING › LIN COMMUNICATION SYSTEM

LIN COMMUNICATION SYSTEM > HOW TO PROCEED WITH TROUBLESHOOTING

for Preparation Click here


HINT:
  1. Use these procedures to troubleshoot the LIN communication system.
  2. *: Use the Techstream.



1.VEHICLE BROUGHT TO WORKSHOP

    NEXT


    2.INSPECT BATTERY VOLTAGE

      Standard voltage:
      11 to 14 V

      HINT:
      If the voltage is below 11 V, recharge or replace the battery before proceeding.


    NEXT


    3.INSPECT COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*
    1. Using the Techstream, inspect the CAN communication function to ensure there are no malfunctions in the communication system (Click here).
      Result 
      Result
      Proceed to
      No DTCs output
      A
      DTCs output
      B



    B.
    Go to CAN COMMUNICATION SYSTEM (Click here)
    A


    4.INSPECT COMMUNICATION FUNCTION OF LIN COMMUNICATION SYSTEM*
    1. Using the Techstream, inspect the LIN communication function to ensure there are no malfunctions in the communication system.
      Result 
      Result
      Proceed to
      No DTCs output
      A
      DTCs output
      B



    B.
    Go to DIAGNOSTIC TROUBLE CODE CHART (Click here)
    A


    5.OVERALL ANALYSIS AND TROUBLESHOOTING*
    1. Data List/Active Test (Click here)

    2. Terminals of ECU (Click here)


    NEXT


    6.ADJUST, REPAIR OR REPLACE

      NEXT

      END