BACK DOOR SUPPORT > REMOVAL |
| 1. REMOVE BACK DOOR DAMPER STAY SUB-ASSEMBLY |
![]() |
Using a screwdriver with its tip wrapped in protective tape, remove the upper side stop ring.
![]() |
Using a screwdriver with its tip wrapped in protective tape, remove the lower side stop ring and back door damper stay sub-assembly.
| 2. REMOVE REAR COMBINATION LIGHT ASSEMBLY |
Remove the rear combination light assembly (Click here).
| 3. REMOVE BACK DOOR SIDE STOPPER |
![]() |
Remove the 2 bolts and remove the back door side stopper.
| 4. REMOVE BACK DOOR STAY COVER |
![]() |
Disengage the 3 clips and remove the back door stay cover.
| 5. REMOVE BACK DOOR STAY LOWER BRACKET |
![]() |
Remove the 2 bolts and remove the back door stay lower bracket.
| 6. REMOVE BACK DOOR STAY UPPER BRACKET |
![]() |
Remove the 2 bolts and remove the back door stay upper bracket.