Home › Suspension › FRONT SUSPENSION › FRONT LOWER SUSPENSION ARM

FRONT LOWER SUSPENSION ARM > INSTALLATION

for Preparation Click here



1. TEMPORARILY INSTALL FRONT NO. 1 SUSPENSION ARM LOWER SUB-ASSEMBLY LH


C155986E01
  1. Install the lower suspension arm with the camber adjusting cam, No. 2 camber adjusting cam, No. 2 toe adjusting plate, toe adjusting cam, bolt, nut and washer.

  1. Align the matchmarks on the No. 2 camber adjusting cam and No. 2 toe adjusting plate. Temporarily install the bolt and nut.



2. CONNECT FRONT LOWER BALL JOINT ATTACHMENT LH


C155985
  1. Connect the attachment to the steering knuckle with the 2 bolts.

    Torque:
    300 N*m{ 3059 kgf*cm , 221 ft.*lbf }



3. CONNECT FRONT SHOCK ABSORBER WITH COIL SPRING LH


C155964
  1. Connect the shock absorber with the bolt and nut.



4. INSTALL FRONT STABILIZER LINK ASSEMBLY LH
  1. Temporarily install the front stabilizer bar with the 4 bolts and the stabilizer bracket LH and RH.



5. STABILIZE SUSPENSION
  1. Lower the vehicle.

  1. Press down on the vehicle several times to stabilize the suspension.



6. TIGHTEN FRONT NO. 1 SUSPENSION ARM LOWER SUB-ASSEMBLY LH
  1. Tighten the bolt and nut.

    Torque:
    280 N*m{ 2855 kgf*cm , 207 ft.*lbf }



7. TIGHTEN FRONT SHOCK ABSORBER WITH COIL SPRING
  1. Tighten the nut.

    Torque:
    195 N*m{ 1988 kgf*cm , 144 ft.*lbf }



8. INSTALL FRONT WHEEL

Torque:
for Aluminum Wheel:
131 N*m{ 1336 kgf*cm , 97 ft.*lbf }
for Steel Wheel:
209 N*m{ 2131 kgf*cm , 154 ft.*lbf }



9. INSPECT AND ADJUST FRONT WHEEL ALIGNMENT
(Click here)