DTC C1300/62 Skid Control ECU Malfunction |
| DTC Code | DTC Detection Condition | Trouble Area |
| C1300/62 | Malfunction in skid control ECU | VSC actuator (skid control ECU) |
| 1.RECONFIRM DTC |
Clear the DTC(s) (Click here).
Turn the ignition switch to ON.
Check if the same DTC is output (Click here).
| Result | Proceed to |
| DTC output | A |
| DTC not output | B |
|
| ||||
| A | ||
| ||