Home › Steering › POWER ASSIST SYSTEMS › POWER STEERING SYSTEM

DTC    C1544    High Engine Revolution Signal

for Preparation Click here


DESCRIPTION

The power steering ECU receives engine speed signals from the ECM via CAN communication. The power steering ECU provides appropriate assisting force in accordance with the engine speed signal.

DTC No.
DTC Detection Condition
Trouble Area
C1544
An abnormal engine speed signal is received.
  1. SFI system
  2. CAN communication system
  3. Power steering ECU assembly

INSPECTION PROCEDURE

1.CHECK OTHER DTC OUTPUT (CAN COMMUNICATION SYSTEM)
  1. Check if DTC U0073 is output (Click here).
    Result 
    Result
    Proceed to
    DTC U0073 is not output
    A
    DTC U0073 is output
    B

    HINT:
    DTC U0073 indicates a CAN communication malfunction in the power steering system.



B
REPAIR CIRCUIT INDICATED BY OUTPUT CODE (Click here)
A


2.CHECK OTHER DTC OUTPUT (SFI SYSTEM)
  1. Using the Techstream, check for DTCs and confirm that there are no problems in the SFI system.
    Engine Type
    See page
    1UR-FE
    Click here
    3UR-FE
    Click here
    3UR-FBE
    Click here
    Result 
    Result
    Proceed to
    DTC is not output
    A
    DTC is output (for 1UR-FE)
    B
    DTC is output (for 3UR-FE)
    C
    DTC is output (for 3UR-FBE)
    D



B
GO TO SFI SYSTEM (Click here)

C
GO TO SFI SYSTEM (Click here)

D
GO TO SFI SYSTEM (Click here)
A

REPLACE POWER STEERING ECU ASSEMBLY (Click here)