Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY

FRONT SEAT INNER BELT ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH (for Manual Seat)


    B191256E01
  1. Install the front seat inner belt LH with the nut.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not allow the anchor part of the front seat inner belt to overlap the protruding part of the front seat adjuster.



    B191249
  1. Connect the connector and engage the 5 clamps.



2. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH (for Power Seat)


    B191260E01
  1. Install the front seat inner belt LH with the nut.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not allow the anchor part of the front seat inner belt to overlap the protruding part of the front seat adjuster.



    B191250
  1. Connect the connector and engage the 5 clamps.



3. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH (w/ Climate Control Seat System)


    B191260E01
  1. Install the front seat inner belt LH with the nut.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not allow the anchor part of the front seat inner belt to overlap the protruding part of the front seat adjuster.



    B191251
  1. Connect the connector and engage the 6 clamps.



4. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (for Manual Seat)


    B191258E01
  1. Install the front seat inner belt RH with the nut.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not allow the anchor part of the front seat inner belt to overlap the protruding part of the front seat adjuster.



    B191252
  1. Engage the 3 clamps.



5. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (for Power Seat)


    B191262E01
  1. Install the front seat inner belt RH with the nut.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not allow the anchor part of the front seat inner belt to overlap the protruding part of the front seat adjuster.



    B191253
  1. Connect the connector and engage the clamp.



6. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (w/ Climate Control Seat System)


    B191262E01
  1. Install the front seat inner belt RH with the nut.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not allow the anchor part of the front seat inner belt to overlap the protruding part of the front seat adjuster.



    B191254
  1. Connect the connector and engage the clamp.



7. INSTALL FRONT SEAT CUSHION SHIELD INNER LH (for Manual Seat)


    B191000E01
  1. Install the harness to the front seat cushion shield.

  1. Engage the 3 claws in the order shown in the illustration, and install the cushion shield.

  1. Install the screw.



8. INSTALL FRONT SEAT ASSEMBLY LH (for Manual Seat)
  1. Install the front seat assembly (Click here).



9. INSTALL FRONT SEAT ASSEMBLY LH (for Power Seat)
  1. Install the front seat assembly (Click here).



10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }

NOTICE:
When disconnecting the cable some systems need to be initialized after the cable is reconnected (Click here).