FRONT PASSENGER AIRBAG ASSEMBLY > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY |
Remove the instrument panel sub-assembly (Click here ).
| 4. REMOVE NO. 1 HEATER TO REGISTER DUCT |
Detach the clamp.
Remove the 5 <G> or <H> screws and duct.

| 5. REMOVE FRONT PASSENGER AIRBAG ASSEMBLY |
![]() |
Remove the 2 screws.
Disengage the 2 clamps.
Disengage the 10 hooks and remove the front passenger airbag from the instrument panel.
![]() |
Using a thin-bladed screwdriver, release the locking button.
Using a thin-bladed screwdriver, disconnect the 2 airbag connectors and remove the instrument panel wire.