Home › Audio/Visual/Telematics › PARK ASSIST / MONITORING › CLEARANCE WARNING ECU

CLEARANCE WARNING ECU > INSTALLATION

for Preparation Click here


HINT:
A bolt without a torque specification is show in the standard bolt chart (Click here).



1. INSTALL CLEARANCE WARNING ECU ASSEMBLY


    E161797
  1. Install the clearance warning ECU to the bracket with the 2 nuts.

    NOTICE:
    1. Avoid any impact to the clearance warning ECU.
    2. Do not drop the ECU. If it is dropped, replace it with a new one.



2. INSTALL NO. 1 ECU INTEGRATION BRACKET


    E191462
  1. Install the No. 1 ECU integration bracket with the bolt and nut.

  1. Connect the ECU connectors and attach the harness clamp.

    NOTICE:
    Do not apply excessive force to the wire harnesses.



3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY RH
  1. Connect the connector.

  1. Attach the 3 claws to install the finish panel.

  1. Install the 3 <D> screws and bolt <A>.



4. INSTALL LOWER NO. 2 INSTRUMENT PANEL AIRBAG ASSEMBLY


    B226008
  1. Connect the connector.

    NOTICE:
    When handling the airbag connector, take care not to damage the airbag wire harness.

  1. Install the 3 bolts to install the instrument panel airbag.

    Torque:
    10 N*m{ 102 kgf*cm , 7 ft.*lbf }



5. INSTALL LOWER INSTRUMENT PANEL
  1. Attach the 2 claws.

  1. Install the panel with the bolt <A> and screw <D>.



6. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
  1. Attach the 2 guides and 4 claws.

  1. Attach the clip to install the under cover.



7. INSTALL INSTRUMENT SIDE PANEL RH


    B229198
  1. Attach the 6 claws to install the side panel.



8. INSTALL COWL SIDE TRIM BOARD RH


B190152
  1. Engage the 2 clips to install the cowl side trim board.

  1. Install the clip.



9. INSTALL FRONT DOOR SCUFF PLATE RH


B190151
  1. Engage the 9 claws to install the scuff plate.



10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).



11. CHECK SRS WARNING LIGHT
  1. Check the SRS warning light .