Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM (for Radio and Display Type)

AUDIO AND VISUAL SYSTEM (for Radio and Display Type) > Disc cannot be Ejected

for Preparation Click here


INSPECTION PROCEDURE

1.PRESS "EJECT" AND CHECK OPERATION
  1. Press the disc eject switch of the radio and display receiver assembly for 2 seconds or more and check that the disc is ejected.

    OK:
    Disc is ejected.



NG
Go to step 2
OK

REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY (Click here)  

2.REPLACE DISC WITH ANOTHER AND RECHECK
  1. Replace the disc with a known good one and check that the malfunction disappears.

    OK:
    Disc is ejected.



NG
REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY (Click here)
OK

END (DISC IS DEFECTIVE)