Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM (for Radio Receiver Type)

AUDIO AND VISUAL SYSTEM (for Radio Receiver Type) > No Sound can be Heard from Speakers

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK RADIO RECEIVER ASSEMBLY
  1. Check the radio receiver assembly settings.

    1. Check that the volume is not set to "0".

    2. Check that "MUTE" is off.

      OK:
      The volume is not set to "0" and "MUTE" is off.



NG
SYSTEM NORMAL (SET VOLUME TO HIGH OR SET MUTE OFF)
OK

PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE (Click here)