Home › Drivetrain ยท AXLE AND DIFFERENTIAL › DIFFERENTIAL MOUNT CUSHION

DIFFERENTIAL MOUNT CUSHION > INSTALLATION

for Preparation Click here



1. INSTALL NO. 1 REAR DIFFERENTIAL MOUNT CUSHION


  1. Using SST, install a new No. 1 rear differential mount cushion.


    C181015E01

    SST
    09570-60010  

    NOTICE:
    1. Temporarily install the mount cushion to the member in order to prevent it from tilting and install the SST.
    2. Be sure to use the correct combination of SST.
    3. Make sure that the SST contacts the entire circumference of the mount cushion.



2. INSTALL SPARE WHEEL STOPPER


    C180989
  1. Install the spare wheel stopper with the 4 bolts.

    Torque:
    20 N*m{ 204 kgf*cm , 15 ft.*lbf }



3. INSTALL REAR DIFFERENTIAL CARRIER ASSEMBLY
  1. Install the differential carrier assembly (Click here).