Home › Drivetrain ยท AXLE AND DIFFERENTIAL › DIFFERENTIAL MOUNT CUSHION

DIFFERENTIAL MOUNT CUSHION > REMOVAL

for Preparation Click here



1. REMOVE REAR DIFFERENTIAL CARRIER ASSEMBLY
  1. Remove the differential carrier assembly (Click here).



2. REMOVE SPARE WHEEL STOPPER


    C180989
  1. Remove the 4 bolts and spare wheel stopper.



3. REMOVE NO. 1 REAR DIFFERENTIAL MOUNT CUSHION


  1. Using SST, remove the No. 1 rear differential mount cushion.


    C181014E01

    SST
    09570-60010  

    NOTICE:
    1. Do not bring the SST into contact with the sub-frame.
    2. Do not slant the bolts of SST.
    3. Set the SST in the correct direction.
    4. Screw the 2 bolts of SST equally into the 2 holes of the rear differential mount.