AIR COOLED OIL COOLER > INSTALLATION |
| 1. INSTALL NO. 1 TRANSMISSION OIL COOLER HOSE |
![]() |
Install the 2 No. 1 transmission oil cooler hoses with the 2 clips.
| 2. INSTALL NO. 2 OIL COOLER TUBE SUB-ASSEMBLY |
![]() |
Connect the No. 2 oil cooler tube sub-assembly to the 2 No. 1 transmission oil cooler hoses with the 2 clips.
Install the No. 2 oil cooler tube sub-assembly with the bolt.
| 3. INSTALL TRANSMISSION OIL COOLER AIR DUCT |
![]() |
Install the No. 1 oil cooler air duct and No. 2 oil cooler air duct with the 4 bolts.
| 4. INSTALL RADIATOR SUPPORT TO FRAME SEAL RH |
![]() |
Install the radiator support to frame seal RH with the 2 clips.
| 5. INSTALL AIR COOLED OIL COOLER ASSEMBLY |
![]() |
Install the oil cooler support bracket with the 2 bolts.
![]() |
Temporarily place the oil cooler on the radiator support.
Install the air cooled oil cooler assembly with the 3 bolts.
| 6. INSTALL OIL COOLER TUBE |
![]() |
Install the oil cooler tube with the 2 bolts.
| 7. INSTALL NO. 1 OIL COOLER HOSE |
![]() |
Install the inlet No. 1 oil cooler hose and outlet No. 1 oil cooler hose with the 4 clips.
Pass the 2 hoses through the flexible hose clamp and close the clamp.
| 8. INSTALL NO. 2 OIL COOLER HOSE |
![]() |
Install the inlet No. 2 oil cooler hose and outlet No. 2 oil cooler hose with the 4 clips.
Install the bolt to fix the water by-pass pipe in place.
| 9. INSTALL FRONT BUMPER ASSEMBLY |
Install the front bumper assembly (Click here).
| 10. ADJUST AUTOMATIC TRANSMISSION FLUID |
Adjust automatic transmission fluid (Click here).
| 11. INSPECT FOR AUTOMATIC TRANSMISSION FLUID LEAK |