REAR AIRBAG SENSOR > ON-VEHICLE INSPECTION |
| 1. CHECK REAR AIRBAG SENSOR ASSEMBLY (VEHICLE NOT INVOLVED IN COLLISION) |
Perform a diagnostic system check (Click here).
| 2. CHECK REAR AIRBAG SENSOR ASSEMBLY (VEHICLE INVOLVED IN COLLISION AND AIRBAG HAS NOT DEPLOYED) |
Perform a diagnostic system check (Click here).
When the quarter panel of the vehicle or its periphery is damaged, check whether there is any damage to the rear airbag sensor. If there are any defects, such as those mentioned below, replace the rear airbag sensor with a new one:
| 3. CHECK REAR AIRBAG SENSOR ASSEMBLY ((VEHICLE INVOLVED IN COLLISION AND AIRBAG IS DEPLOYED) |
Replace the rear airbag sensor.