Home › Suspension › SUSPENSION CONTROL › HEIGHT CONTROL COMPRESSOR

HEIGHT CONTROL COMPRESSOR > INSTALLATION

for Preparation Click here



1. INSTALL HEIGHT CONTROL COMPRESSOR BRACKET


C180594
  1. Install the height control compressor bracket with the 3 bolts.

    Torque:
    5.9 N*m{ 60 kgf*cm , 52 in.*lbf }



    C180591
  1. Connect the 3 wire harness clamps.



2. INSTALL HEIGHT CONTROL FILTER


C180590
  1. Install the height control filter with the 2 bolts.

    Torque:
    6.4 N*m{ 65 kgf*cm , 57 in.*lbf }

  1. Connect the 2 hoses.



3. INSTALL HEIGHT CONTROL NO. 1 COMPRESSOR


C180602
  1. Install the height control compressor with the 3 bolts.

    Torque:
    29 N*m{ 296 kgf*cm , 21 ft.*lbf }

  1. Connect the height control tube (Click here).

  1. Connect the 2 wire harness connectors.

  1. Connect the hoses with 4 new clips.

  1. Install the compressor cover with 3 new clips.



4. INSTALL REAR BUMPER COVER
(Click here)