DTC B2797 Communication Malfunction No. 1 |
DTC B2798 Communication Malfunction No. 2 |
| DTC Code | DTC Detection Condition | Trouble Area |
| B2797 B2798 | A communication error occurs for about 20 seconds after insertion of a key. |
|

| 1.CHECK KEY |
![]() |
Check whether the ignition key being used is near other ignition keys, as shown in the illustration. Also, check whether the key ring is in contact with the key grip.
| Result | Proceed to |
| Key is near other keys and/or key ring is in contact with key grip | A |
| Key is not near other keys and/or key ring is not in contact with key grip | B |
|
| ||||
| A | |
| 2.CLEAR DTC |
Separate the keys from each other, or remove the key ring.
Clear the DTC (Click here).
| NEXT | |
| 3.CHECK FOR DTC |
Check that no DTC is output (Click here).
|
| ||||
| OK | ||
| ||
| 4.REPLACE TRANSPONDER KEY AMPLIFIER |
Temporarily replace the transponder key amplifier with a new or normally functioning one (Click here).
| NEXT | |
| 5.CLEAR DTC |
Clear the DTC (Click here).
| NEXT | |
| 6.CHECK DTC |
Check for DTC is output (Click here).
|
| ||||
| OK | ||
| ||