Home › Vehicle Exterior › DOOR / HATCH › POWER BACK DOOR SYSTEM

DTC    B2225    Back Door Motor Clutch Malfunction

for Preparation Click here


DESCRIPTION

When a voltage and current malfunction (open or short) is detected in the clutch circuit of the power back door drive unit while the power back door is operating, the power back door ECU outputs DTC B2225.

DTC Code
DTC Detection Condition
Trouble Area
B2225
Voltage and current malfunction in clutch circuit of power back door drive unit
Power back door drive unit (Power back door ECU)

INSPECTION PROCEDURE

1.CLEAR DTC
  1. Clear the DTCs (Click here).


NEXT


2.CHECK FOR DTC
  1. Check for DTCs (Click here).

    OK:
    DTC B2225 is not output.



NG
REPLACE POWER BACK DOOR DRIVE UNIT (POWER BACK DOOR ECU) (Click here)
OK

USE SIMULATION METHOD TO CHECK (Click here)