FRONT SEAT INNER BELT ASSEMBLY > INSTALLATION |
| 1. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH (for Manual Seat) |
![]() |
Install the front seat inner belt assembly LH with the nut.
![]() |
Connect the connector and attach the 5 clamps.
| 2. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH (for Power Seat) |
![]() |
Install the front seat inner belt assembly LH with the nut.
![]() |
Connect the connector and attach the 5 clamps.
| 3. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH (w/ Climate Control Seat System) |
![]() |
Install the front seat inner belt assembly LH with the nut.
![]() |
Connect the connector and attach the 6 clamps.
| 4. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (for Manual Seat) |
![]() |
Install the front seat inner belt assembly RH with the nut.
![]() |
Attach the 3 clamps.
| 5. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (for Power Seat) |
![]() |
Install the front seat inner belt assembly RH with the nut.
![]() |
Connect the connector and attach the clamp.
| 6. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (w/ Climate Control Seat System) |
![]() |
Install the front seat inner belt assembly RH with the nut.
![]() |
Connect the connector and attach the clamp.
| 7. INSTALL FRONT SEAT CUSHION SHIELD INNER LH (for Manual Seat) |
![]() |
Attach the wire harness clamp.
Attach the 3 claws in the order shown in the illustration, to install the cushion shield.
Install the screw.
| 8. INSTALL FRONT SEAT ASSEMBLY LH (for Manual Seat) |
Install the front seat assembly LH (Click here).
| 9. INSTALL FRONT SEAT ASSEMBLY LH (for Power Seat) |
Install the front seat assembly LH (Click here).
| 10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |