FRONT SEAT INNER BELT ASSEMBLY > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE FRONT SEAT ASSEMBLY LH (for Manual Seat) |
Remove the front seat assembly (Click here).
| 3. REMOVE FRONT SEAT ASSEMBLY LH (for Power Seat) |
Remove the front seat assembly (Click here).
| 4. REMOVE FRONT SEAT CUSHION SHIELD INNER LH (for Manual Seat) |
![]() |
Remove the screw.
Detach the 3 claws in the order shown in the illustration, and then remove the front seat cushion shield.
Detach the wire harness clamp.
| 5. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH (for Manual Seat) |
![]() |
Disconnect the connector and detach the 5 clamps.
![]() |
Remove the nut and front seat inner belt LH.
| 6. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH (for Power Seat) |
![]() |
Disconnect the connector and detach the 5 clamps.
![]() |
Remove the nut and front seat inner belt LH.
| 7. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH (w/ Climate Control Seat System) |
![]() |
Disconnect the connector and detach the 6 clamps.
![]() |
Remove the nut and front seat inner belt LH.
| 8. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH (for Manual Seat) |
![]() |
Detach the 3 clamps.
![]() |
Remove the nut and front seat inner belt RH.
| 9. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH (for Power Seat) |
![]() |
Disconnect the connector and detach the clamp.
![]() |
Remove the nut and front seat inner belt RH.
| 10. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH (w/ Climate Control Seat System) |
![]() |
Disconnect the connector and detach the clamp.
![]() |
Remove the nut and front seat inner belt RH.