Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY

FRONT SEAT INNER BELT ASSEMBLY > REMOVAL

for Preparation Click here



1. PRECAUTION

NOTICE:
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work (Click here).



2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable some systems need to be initialized after the cable is reconnected (Click here).



3. REMOVE FRONT SEAT ASSEMBLY LH (for Manual Seat)
  1. Remove the front seat assembly LH (Click here).



4. REMOVE FRONT SEAT ASSEMBLY LH (for Power Seat)
  1. Remove the front seat assembly LH (Click here).



5. REMOVE FRONT SEAT CUSHION SHIELD INNER LH (for Manual Seat)


    B190975E01
  1. Remove the screw.

  1. Detach the 3 claws in the order shown in the illustration, and then remove the front seat cushion shield.

  1. Detach the wire harness clamp.



6. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH (for Manual Seat)


    B191249
  1. Disconnect the connector and detach the 5 clamps.



    B191255
  1. Remove the nut and front seat inner belt assembly LH.

  1. Remove the front seat belt anchor plate.



7. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH (for Power Seat)


    B191250
  1. Disconnect the connector and detach the 5 clamps.



    B191259
  1. Remove the nut and front seat inner belt assembly LH.

  1. Remove the front seat belt anchor plate.



8. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH (w/ Climate Control Seat System)


    B191251
  1. Disconnect the connector and detach the 6 clamps.



    B191259
  1. Remove the nut and front seat inner belt assembly LH.

  1. Remove the front seat belt anchor plate.



9. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH (for Manual Seat)


    B191252
  1. Detach the 3 clamps.



    B191257
  1. Remove the nut and front seat inner belt assembly RH.

  1. Remove the front seat belt anchor plate.



10. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH (for Power Seat)


    B191253
  1. Disconnect the connector and detach the clamp.



    B191261
  1. Remove the nut and front seat inner belt assembly RH.

  1. Remove the front seat belt anchor plate.



11. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH (w/ Climate Control Seat System)


    B191254
  1. Disconnect the connector and detach the clamp.



    B191261
  1. Remove the nut and front seat inner belt assembly RH.

  1. Remove the front seat belt anchor plate.