STARTER > INSTALLATION |
| 1. INSTALL FLYWHEEL HOUSING SIDE COVER |
![]() |
| 2. INSTALL STARTER ASSEMBLY |
![]() |
Install the starter with the 2 bolts.
![]() |
Install the starter wire with the nut.
Connect the starter connector.
| 3. INSTALL STARTER COVER |
![]() |
Install the starter cover with the 3 bolts.
| 4. INSTALL EXHAUST MANIFOLD SUB-ASSEMBLY RH |
Install the exhaust manifold sub-assembly RH (Click here).
| 5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL |