FRONT EVAPORATOR TEMPERATURE SENSOR > REMOVAL |
| 1. REMOVE FRONT AIR CONDITIONING UNIT |
Remove the front air conditioning unit (Click here).
| 2. REMOVE LOWER DEFROSTER NOZZLE ASSEMBLY |
![]() |
Detach the 4 claws and remove the nozzle.
| 3. REMOVE NO. 2 AIR DUCT SUB-ASSEMBLY |
![]() |
Remove the screw and the air duct.
| 4. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY |
![]() |
Disconnect the connector.
Remove the 2 screws and the amplifier.
| 5. REMOVE AIR CONDITIONING RADIATOR ASSEMBLY |
![]() |
Remove the packing.
![]() |
Detach the 3 claws and remove the heater clamp.
![]() |
Remove the 6 screws.
Detach the 3 claws and remove the air conditioning radiator.
| 6. REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY |
![]() |
Remove the evaporator from the blower case.
| 7. REMOVE EVAPORATOR TEMPERATURE SENSOR |
![]() |
Remove the sensor.