Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY (for Fold Down Seat Type)

FRONT SEAT ASSEMBLY (for Fold Down Seat Type) > INSTALLATION

for Preparation Click here



1. INSTALL FRONT SEAT ASSEMBLY RH
  1. Place the front seat assembly in the cabin.

    NOTICE:
    Be careful not to damage the vehicle body.

  1. Connect the seat wire connectors under the seat.

  1. Lift up the seat track adjusting handle to move the seat to the rearmost position.



    B191042
  1. Install the 2 bolts.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }

  1. Lift up the seat track adjusting handle to move the seat to the foremost position.



    B191041
  1. Install the 2 bolts.

    Torque:
    37 N*m{ 377 kgf*cm , 27 ft.*lbf }



2. INSTALL SEAT TRACK COVER INNER RH


    B200255
  1. Attach the 2 claws to install the seat track cover.



3. INSTALL SEAT TRACK COVER OUTER RH


    B191067
  1. Attach the 2 claws to install the seat track cover.



4. INSTALL FRONT OUTER SEAT TRACK BRACKET COVER RH (w/ Cover)
  1. Lift up the seat track adjusting handle and move the seat to the rearmost position.



    B232184E01
  1. Attach the 4 claws in the order shown in the illustration to install the cover.



5. INSTALL FRONT INNER SEAT TRACK BRACKET COVER (w/ Cover)


    B232183E01
  1. Attach the 4 claws in the order shown in the illustration to install the cover.



6. INSTALL FRONT SEAT HEADREST ASSEMBLY
  1. Install the front seat headrest assembly.



7. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable some systems need to be initialized after the cable is reconnected (Click here).



8. CHECK SRS WARNING LIGHT
  1. Check the SRS warning light (Click here).