DTC B1445/45 Passenger Side Cool Air Bypass Damper Control |
| DTC Code | DTC Detection Condition | Trouble Area |
| B1445/45 | The cool air bypass damper servo motor position does not change even if the air conditioning amplifier assembly operates the cool air bypass damper servo motor. |
|

| 1.READ VALUE USING INTELLIGENT TESTER (COOL AIR BYPASS DAMPER SERVO MOTOR) |
Use the Data List to check if the servo motor is functioning properly.
| Tester Display | Measurement Item / Range | Normal Condition | Diagnostic Note |
| Cool Air Bypass Pulse | Cool air bypass damper servo motor | Min.: 0 Max.: 255 | - |
Visually inspect the cool air bypass damper servo motor.
Visually inspect whether the cool air bypass damper servo motor operates.
| Result | Proceed to |
| The Data List value changes and the cool air bypass damper servo motor operates (When troubleshooting according to the DTC output) | A |
| The Data List value changes and the cool air bypass damper servo motor operates (When troubleshooting according to Problem Symptoms Table) | B |
| The Data List value does not change and the cool air bypass damper servo motor does not operate | C |
| The Data List value changes, but the cool air bypass damper servo motor does not operate | D |
|
| ||||
|
| ||||
|
| ||||
| A | |
| 2.CHECK FOR DTC |
Clear the DTCs (Click here).
Check for DTCs (Click here).
|
| ||||
| OK | ||
| ||
| 3.CHECK DAMPER SERVO SUB-ASSEMBLY (COOL AIR BYPASS DAMPER SERVO MOTOR) |
Replace the damper servo sub-assembly (cool air bypass damper servo motor) (Click here).
Clear the DTCs (Click here).
Check for DTCs (Click here).
|
| ||||
| OK | ||
| ||
| 4.CHECK AIR CONDITIONING HARNESS ASSEMBLY |
Replace the air conditioning harness assembly (Click here).
Clear the DTCs (Click here).
Check for DTCs (Click here).
|
| ||||
| OK | ||
| ||