NAVIGATION ANTENNA > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE INSTRUMENT PANEL SUB-ASSEMBLY |
| 4. REMOVE NO. 1 HEATER TO REGISTER DUCT |
Detach the clamp.
Remove the 5 <G> or <H> screws and duct.

| 5. REMOVE NO. 1 SIDE DEFROSTER NOZZLE DUCT |
![]() |
Remove the 2 <G> or <H> screws.
Detach the 2 claws and remove the duct.
| 6. REMOVE NO. 2 SIDE DEFROSTER NOZZLE DUCT |
![]() |
Remove the 2 <G> or <H> screws.
Detach the 2 claws and remove the duct.
| 7. REMOVE DEFROSTER NOZZLE ASSEMBLY |
![]() |
Remove the 3 <G> or <H> screws and defroster nozzle.
| 8. REMOVE NAVIGATION ANTENNA ASSEMBLY |
![]() |
Detach the clamp.
Remove the 2 screws and antenna.