Home › Audio / Visual / Telematics › AUDIO / VIDEO › TELEVISION DISPLAY

TELEVISION DISPLAY > INSTALLATION

for Preparation Click here



1. INSTALL TELEVISION DISPLAY BRACKET


E161065E01
  1. Attach the clip and 2 claws to install the bracket.

  1. Install the 4 bolts.

    Torque:
    7.0 N*m{ 71 kgf*cm , 62 in.*lbf }

    HINT:
    Install the bolts in the order shown in the illustration.



2. INSTALL ROOF HEADLINING ASSEMBLY
(Click here)


3. INSTALL TELEVISION DISPLAY ASSEMBLY


    E260243E01
  1. Attach the 2 clips to install the television display.

  1. Install the 4 bolts.

    Torque:
    7.0 N*m{ 71 kgf*cm , 62 in.*lbf }

    HINT:
    Install the bolts in the order shown in the illustration.



    B321163
  1. Connect the connector.

  1. Attach the clamp.



4. INSTALL ROOM NO. 1 LIGHT ASSEMBLY


    B191797
  1. Connect the connector.



    B193891
  1. Attach the 4 clips to install the No. 1 room light.



5. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable some systems need to be initialized after the cable is reconnected (Click here).

Torque:
5.4 N*m{ 55 kgf*cm , 48 in.*lbf }



6. CHECK SRS WARNING LIGHT
(Click here)