Home › Suspension › REAR SUSPENSION › REAR COIL SPRING

REAR COIL SPRING > REMOVAL

for Preparation Click here



1. REMOVE REAR SHOCK ABSORBER ASSEMBLY LH
(Click here)


2. LOOSEN REAR UPPER CONTROL ARM ASSEMBLY LH


C206452
  1. Loosen the 3 bolts and 3 nuts.

    NOTICE:
    Do not remove the bolts and nuts.



3. REMOVE REAR COIL SPRING LH


C180774
  1. Insert a piece of wood between the jack and the No. 2 lower arm, and raise the No. 2 lower arm.

    HINT:
    Raise the lower arm to the point just before the vehicle is raised.



    C180776
  1. Using SST, compress the coil spring.

    SST
    09727-30021  

  1. Gently lower the jack and remove the coil spring and insulator.