Home › Suspension › REAR SUSPENSION › REAR LOWER ARM (for No. 2 Arm)

REAR LOWER ARM (for No. 2 Arm) > REMOVAL

for Preparation Click here



1. REMOVE REAR COIL SPRING LH
(Click here)


2. REMOVE REAR PNEUMATIC CYLINDER ASSEMBLY LH (w/ Air Suspension)
(Click here)


3. REMOVE NO. 2 REAR SUSPENSION ARM ASSEMBLY LH


C180775
  1. Remove the cotter pin and nut.



    C181305E01
  1. Using SST, separate the No. 2 rear suspension arm.

    SST
    09950-40011   (09951-04010, 09953-04020, 09954-04010, 09955-04031, 09958-04011, 09952-04010)
    09955-04090  

    HINT:
    Claw A 09955-04090
    Claw B 09955-04031



    C180773E01
  1. Put matchmarks on the No. 2 rear suspension arm and adjusting cam.

  1. Remove the bolt, nut and No. 2 rear suspension arm.