Home › Audio / Visual / Telematics › AUDIO / VIDEO › AUDIO AND VISUAL SYSTEM (for Radio and Display Type)

AUDIO AND VISUAL SYSTEM (for Radio and Display Type) > MirrorLink Function cannot be Started

for Preparation Click here


INSPECTION PROCEDURE

1.CHECK SMARTPHONE
  1. Check that the connected smartphone is powered on.
    Result 
    Result
    Proceed to
    The connected smartphone is powered on.
    A
    The connected smartphone is not powered on.
    B



B
TURN SMARTPHONE ON
A


2.CHECK RADIO AND DISPLAY RECEIVER ASSEMBLY
  1. Check that "MirrorLink" is not illuminated on the information screen of the radio and display receiver assembly.
    Result 
    Result
    Proceed to
    "MirrorLink" is not illuminated.
    A
    "MirrorLink" is illuminated.
    B



B
Go to step 4
A


3.CHECK SMARTPHONE
  1. Refer to System Description and check if the connected smartphone is "MirrorLink" compatible (Click here).
    Result 
    Result
    Proceed to
    The connected smartphone is "MirrorLink" compatible.
    A
    The connected smartphone is not "MirrorLink" compatible.
    B



B
CONNECT "MirrorLink" COMPATIBLE SMARTPHONE
A


4.CHECK APPLICATION
  1. Refer to System Description and check if a "MirrorLink" compatible application is installed on the connected smartphone (Click here).
    Result 
    Result
    Proceed to
    A "MirrorLink" compatible application is installed.
    A
    A "MirrorLink" compatible application is not installed.
    B



B
INSTALL "MirrorLink" COMPATIBLE APPLICATION
A


5.CHECK APPLICATION RUNNING STATUS
  1. Connect the smartphone to the head unit with a "MirrorLink" compatible application running and check if the "MirrorLink" function can be used.

    HINT:
    The "MirrorLink" function may not start if the application is not running.
    Result 
    Result
    Proceed to
    The "MirrorLink" function can be used.
    A
    The "MirrorLink" function cannot be used.
    B



B
REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY (Click here)
A

END