Home › Vehicle Exterior › BODY WELD POINT › RADIATOR SUPPORT
BM27L0U _01 Vehicle Exterior _049510 BODY WELD POINT _0237175 RADIATOR SUPPORT F

BODY WELD POINT  RADIATOR SUPPORT  ASSEMBLY REPLACEMENT  


K127267

REMOVAL / INSTALLATION


Symbol Meaning
K108818

Remove Weld Points
K108823

Plug Weld

INSTALLATION POINT
1.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

2.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

3.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.

4.

Measure the dimensions before installing the headlights.


K127293

K127294N01
3.031,5.125 3.198,5.302 0.167,0.177 10 true C 3.24,5.458 3.427,5.646 0.188,0.188 10 true D 1.896,4.281 2.073,4.479 0.177,0.198 10 true A 2.073,4.594 2.24,4.802 0.167,0.208 10 true B

Reference Value:
Area Measurement Area Measurement
A 1134 mm (44.65 in.) B 1060 mm (41.73 in.)
C 1615 mm (63.58 in.) D 1222 mm (48.11 in.)