Home › Vehicle Exterior › BODY WELD POINT › BACK DOOR OPENING SIDE REINFORCEMENT
BM27L0U _01 Vehicle Exterior _049510 BODY WELD POINT _0237188 BACK DOOR OPENING SIDE REINFORCEMENT F

BODY WELD POINT  BACK DOOR OPENING SIDE REINFORCEMENT  CUT AND JOIN REPLACEMENT SECTIONS  


K127279

With the back door opening trough removed.


REMOVAL / INSTALLATION


Symbol Meaning
K108818

Remove Weld Points
K108820

Remove Weld Points
K108827

Cut and Join Location
K108823

Plug Weld
K108825

Plug Weld
K108831

Butt Weld

INSTALLATION POINT
1.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

2.

*a is only for installation.

3.

After welding, apply foamed sealing material to the corresponding parts. (See the painting / coating)

4.

After welding, apply body sealer to the corresponding parts. (See the painting / coating)

5.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K127323C01
1.531,1.531 2.354,1.781 0.823,0.25 10 false 120 (4.72) 3.771,5.25 4.5,5.448 0.729,0.198 10 false 140 (5.51) 6.646,8.479 6.948,8.74 0.302,0.26 10 false *b 3.385,6.188 3.667,6.354 0.281,0.167 10 false *a
*b mm (in.) - -