Home › Vehicle Exterior › BODY WELD POINT › BODY LOWER BACK PANEL
BM27L0U _01 Vehicle Exterior _049510 BODY WELD POINT _0237189 BODY LOWER BACK PANEL F

BODY WELD POINT  BODY LOWER BACK PANEL  ASSEMBLY REPLACEMENT  


K127281

With the back door opening side reinforcement and body lower back inner panel removed.


REMOVAL / INSTALLATION


Symbol Meaning
K108819

Remove Weld Points
K108820

Remove Weld Points
K108822

Spot Weld
K108823

Plug Weld
K108824

Plug Weld
K108825

Plug Weld

INSTALLATION POINT
1.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.

2.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

3.

*a is only for installation.

4.

After welding, apply body sealer and undercoating to the corresponding parts. (See the painting / coating)

5.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.


K127325N01
1.333,3.927 1.563,4.125 0.229,0.198 10 false *a 1.854,3.938 2.073,4.115 0.219,0.177 10 false *a 2.333,3.927 2.552,4.104 0.219,0.177 10 false *a 4.396,3.927 4.615,4.104 0.219,0.177 10 false *a 4.875,3.927 5.094,4.104 0.219,0.177 10 false *a 5.385,3.938 5.604,4.115 0.219,0.177 10 false *a

K127326