For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter
mm (in.) |
|---|---|---|
| A, a | Rear suspension member installation hole | φ22.5 (0.886) |
| B, b | Lower arm installation hole | φ16.5 (0.650) |
| C, c | Lower arm installation hole | φ16.5 (0.650) |
| D, d | Rear suspension member installation hole | φ43 (1.69) |
| *A | FRONT | *B | LH |
| *C | RH | - | - |
| *a | Imaginary Datum Line | *b | mm
(in.) |