Home › General › BODY ELECTRICAL › MULTIPLEX COMMUNICATION
NM27L0U _V1 General _050243 BODY ELECTRICAL _0241759 MULTIPLEX COMMUNICATION UN GENERAL/CONTROL/DETAILS F

BODY ELECTRICAL  MULTIPLEX COMMUNICATION  GENERAL/CONTROL/DETAILS  DIFFERENCES BETWEEN CAN, LIN, AVC-LAN AND BEAN  


GENERAL


a.

The protocols, which are the rules for establishing data communication, differ between the CAN, LIN, AVC-LAN, and BEAN. If the ECUs in the networks use different frameworks for their data, such as communication speed, communication wire, and signals, they will be unable to understand each other. Therefore, protocols (rules) must be established among them.


b.

Compared to the LIN, AVC-LAN and BEAN, the CAN features high-speed data transmission. Therefore, the CAN is able to transmit larger amounts of data faster than other protocols. This feature makes it possible to transmit data accurately in the power train and chassis control system, which requires large amounts of data to be transmitted in short periods of time.

Protocol CAN (ISO Standard) LIN (LIN Consortium) AVC-LAN (TOYOTA Original) BEAN (TOYOTA Original)
Communication Speed 500 kbps*/ HS-CAN 250 kbps*/ MS-CAN (Max. 1 Mbps) Max. 20 kbps* Max. 17.8 kbps*/ AVC-LAN 7.5 Mbps*/ AVC-LAN plus Max. 10 kbps*
Communication Wire Twisted-pair Wire AV Single Wire Twisted-pair Wire AV Single Wire
Drive Type Differential Voltage Drive Single Wire Voltage Drive Differential Voltage Drive Single Wire Voltage Drive
Data Length 1-8 Byte(s) (Variable) 2, 4, 8 Bytes (Variable) 0-32 Byte(s) (Variable) 1-11 Byte(s) (Variable)

*: bps: Abbreviation for "Bits Per Second", indicating the number of bits that can be transmitted per second.