GENERAL
The LIN (Local Interconnect Network) consists of bus for each system of the body electrical system, and used for communication between switches.
The signals transmitted by the LIN can be gatewayed to the CAN through the ECUs or switches connected to the CAN.
SYSTEM DIAGRAM
LAYOUT OF MAIN COMPONENTS
| *A | Models with Sliding Roof System | - | - |
| *1 | Sliding Roof ECU | *2 | Accessory Meter |
| *3 | Combination Meter | *4 | Main Body ECU (Cowl Side Junction Block LH) |
| *5 | Front Power Window Regulator Motor Assembly LH
·
Power Window ECU |
*6 | Air Conditioning Amplifier |
| *7 | Back Door ECU | *8 | Front Power Window Regulator Motor Assembly RH
·
Power Window ECU |
| *9 | Heater Control Panel | - | - |