General
A fuel cut control is used to stop the fuel pump when SRS airbags deploy in a frontal or side collision.
Compact 12-hole type fuel injectors are used to improve the atomization of fuel.
Quick connectors are used to connect the fuel lines for ease of serviceability.
A multi-layer plastic fuel tank is used.
An evaporative emission control system is used.
| *1 | Fuel Delivery Pipe | *2 | Fuel Injector |
| *3 | Quick Connector | *4 | Fuel Tank |
| *5 | Fuel Pump Assembly
·
Fuel Pump ·
Fuel Filter ·
Fuel Sender Gauge |
*6 | Chalcoal Canister Assembly |
| *a | View from Bottom Side | *b | Fuel Injector Cross Section |
Delivery Pipe
Fuel delivery pipes formed from stamped steel are used to deliver fuel to the fuel injectors.
A pulsation damper is provided on the fuel delivery pipe in the left bank. A fuel pressure regulator is installed on the right bank fuel delivery pipe.
| *1 | Fuel Pressure Regulator | *2 | Fuel Delivery Pipe |
| *3 | Pulsation Damper | - | - |