GENERAL
The valve body consists of the upper (No. 1 and No. 2) and lower (No. 1 and No. 2) valve bodies and 9 solenoid valves.
| *1 | Solenoid Valve S4 | *2 | Solenoid Valve S1 |
| *3 | Solenoid Valve SR | *4 | Solenoid Valve SL1 |
| *5 | Solenoid Valve SLT | *6 | No. 1 Lower Valve Body |
| *7 | No. 2 Lower Valve Body | *8 | Solenoid Valve SL2 |
| *9 | Solenoid Valve SLU | *10 | No. 1 Upper Valve Body |
| *11 | No. 2 Upper Valve Body | *12 | Solenoid Valve S3 |
| *13 | Solenoid Valve S2 | - | - |
| *1 | Clutch Control Valve | *2 | Clutch Apply Relay Valve |
| *3 | C1 Accumulator | *4 | Secondary Regulator Valve |
| *5 | Lock-up Relay Valve | *6 | Lock-up Control Valve |
| *7 | C3 Check Valve | *8 | 1 - 2 Shift Valve |
| *9 | B4 Outer Check Valve | *10 | B2 Accumulator |
| *11 | 3 - 4 Shift Valve | *12 | 2 - 3 Shift Valve |
| *13 | Reverse Sequence Valve | - | - |
| *1 | C3 Apply Relay Valve | - | - |
| *1 | SLT Damper | *2 | Primary Regulator Valve |
| *3 | 4 - 5 Shift Valve | - | - |
| *1 | B1 Apply Relay Valve | *2 | SL1 Relay Valve |
| *3 | Brake Control Valve | *4 | Solenoid Modulator Valve |
| *5 | Accumulator Control Valve | - | - |
SOLENOID VALVE
Solenoid Valves S1, S2, S3, S4 and SR
These solenoid valves are 3-way solenoid valves.
A filter is provided at the tip of the solenoid valve to further improve operational reliability.
| *1 | Filter | - | - |
| *a | Control Pressure | *b | Line Pressure |
| *c | Solenoid Valve S1 Off | *d | Drain |
| *e | Solenoid Valve S1 On | *f | Solenoid Valve S4 Off |
| *g | Solenoid Valve S4 On | - | - |
| Solenoid Valve | Type | Function |
|---|---|---|
| S1 | 3-way | ·
Switches the 1 - 2 shift valve. ·
Switches the SL1 relay valve. |
| S2 | 3-way | ·
Switches the 2 - 3 and the 5 - 6 shift valves. ·
Switches the 1 - 2 shift valve. |
| S3 | 3-way | Switches the 3 - 4 shift valve. |
| S4 | 3-way | ·
Switches the 4 - 5 shift valve. ·
Switches the SL1 relay valve. ·
Switches the reverse sequence valve. |
| SR | 3-way | ·
Switches the clutch apply relay valve. ·
Switches the B1 relay valve. |
Solenoid Valves SL1, SL2, SLT and SLU
SL1, SL2, SLT, and SLU are used by the ECM to control hydraulic pressures in a linear fashion based on the current that the ECM causes to flow through their solenoid coils. They control line, clutch, and brake engagement pressure based on the signals received from the ECM.
| Solenoid Valve | Function |
|---|---|
| SL1 | ·
Clutch pressure control ·
Accumulator back pressure control |
| SL2 | Brake pressure control |
| SLT | ·
Line pressure control ·
Accumulator back pressure control |
| SLU | Lock-up clutch pressure control |