DESCRIPTION
The 2-joint type propeller shaft is used for the front and rear propeller shafts.
| *1 | Hooke's Joint | *2 | Steel Tube Yok |
| *3 | Steel Tube | *4 | Steel Yoke Shaft |
| *5 | Steel Sleeve Spline | - | - |
| *a | Front Differential | *b | Transfer |
The rear propeller shaft for 2WD models uses the aluminum tube yoke and tube to reduce its weight.
The rear propeller shaft for 4WD models uses the aluminum tube yoke, tube, yoke shaft and sleeve spline to reduce its weight.
| *1 | Hooke's Joint | *2 | Aluminum Tube Yoke |
| *3 | Aluminum Tube | - | - |
| *a | Transmission | *b | Rear Differential |
| *1 | Hooke's Joint | *2 | Aluminum Yoke Shaft |
| *3 | Aluminum Tube | *4 | Aluminum Tube Yoke |
| *5 | Aluminum Sleeve Spline | - | - |
| *a | Transfer | *b | Rear Differential |