Home › General › CHASSIS › TRANSFER
NM27L0U _V1 General _050239 CHASSIS _0243363 TRANSFER UN GENERAL/CONTROL/DETAILS F

CHASSIS  TRANSFER  GENERAL/CONTROL/DETAILS  DESCRIPTION  


General


a.

The JF3A transfer has been newly developed. This transfer is a compact and lightweight multi-mode 2-speed transfer.


b.

This transfer uses a one-touch 2-4 select system, enabling the driver to make a 2WD - 4H - 4L selection by turning a 4WD control switch.


c.

The 4WD control system uses the 4WD control ECU to actuate and control the Automatic Disconnection Differential (A.D.D.) shift actuator and the transfer shift actuator.


d.

The center differential uses a TORSEN* Limited Slip Differential (LSD).


e.

A planetary gear train is used in the reduction mechanism and a silent chain is used to reduce noise for the front drive. The 4WD control switch is used to change the transfer gear ratio and to transmit drive force to the front, and the center differential lock switch is used to change the center differential between free and lock.

*: TORSEN is JTEKT CORPORATION's registered trademark.

X131802

Specification

*: Weight shows the figure with the fluid fully filled.

Transfer Type JF3A
Drive Type Multi-mode (Part-time and Full-time)
Gear Ratio 2WD 1.000
4H 1.000
4L 2.618
Reduction Gear Type Single Pinion Planetary
Center Differential Gear Type TORSEN LSD
Oil Capacity 1.35 Liters (1.43, US qts, 1.19 Imp. qts)
Oil Viscosity SAE 75W-90
Oil Grade API GL-5
Weight (Reference)* 52.3 kg (115.3 lb)