General
The front differential with electric type Automatic Disconnection Differential (A.D.D.) shift actuator for 4WD models uses the SD22AD type.
The rear differential uses the FD25A type.
The differential carrier, differential retainer and intermediate tube on the front differential are made of aluminum to reduce their weight.
A double row bearing is used for the front bearing on the front differential to reduce friction loss, thus improving fuel consumption.
A conical spring (differential pre-torque mechanism) is used in the differential portion to improve the start-off performance of the vehicle on slippery road surfaces.
Low viscosity oil is used for front and rear differentials, also improving fuel consumption.
| *1 | Differential Carrier | *2 | Front Bearing |
| *3 | Intermediate Tube | *4 | A.D.D. Shift Actuator |
| *5 | Retainer | - | - |
| *1 | Differential Pre-torque Mechanism | - | - |
|
*1: Weight shows the figure with no fluids. *2: Models with Towing package |
||
| Differential Type | Front | Rear |
| SD22AD | FD25A | |
| Differential Gear Ratio | 3.909, 4300*2 | 3.909, 4300*2 |
| Ring Gear Size | 220 mm (8.66 in.) | 252 mm (9.9 in.2) |
| Oil Capacity | 2.05 Liters (2.17 US qts, 1.80 Imp.qts) | 1.55 Liters (1.64 US qts, 1.36 Imp.qts) |
| Oil Viscosity | SAE 75W-85 | SAE 75W-85 |
| Oil Grade | API GL-5 | API GL-5 |
| Weight (Reference)*1 | 36.2 kg (79.8 lb) | 48.2 kg (106.3 lb) |