General
The double-wishbone independent suspension is used for the front and rear on all models.
An air suspension system for the rear suspension is standard equipment for the Platinum grade.
An Adaptive Variable Suspension system (AVS) is provided as standard equipment for the Platinum grade.
Front Suspension
Through the optimal allocation of components, the front suspension realizes excellent riding comfort and controllability.
| *1 | Upper Arm | *2 | Shock Absorber |
| *3 | Stabilizer Bar | *4 | Steering Knuckle |
| *5 | Coil Spring | *6 | Lower Arm |
| *1 | Upper Arm | *2 | Shock Absorber |
| *3 | Stabilizer Bar | *4 | Steering Knuckle |
| *5 | Coil Spring | *6 | Lower Arm |
| *7 | Absorber Control Actuator | - | - |
The camber and toe-in of the front suspension can be adjusted using the adjustment cams of the lower arms. For details, see the Repair Manual.
Rear Suspension
Through the optimal allocation of components, the front suspension realizes excellent riding comfort and controllability.
| *1 | Upper Arm | *2 | Lower Arm No. 1 |
| *3 | Stabilizer Bar | *4 | Shock Absorber |
| *5 | Lower Arm No. 2 | *6 | Coil Spring |
| *1 | Upper Arm | *2 | Lower Arm No. 1 |
| *3 | Stabilizer Bar | *4 | Shock Absorber |
| *5 | Compressor and Motor with Dryer | *6 | Lower Arm No. 2 |
| *7 | Pneumatic Cylinder | - | - |
The camber and toe-in of the rear suspension can be adjusted using the adjustment cams of the lower arms. For details, see the Repair Manual.