GENERAL
In the blind spot monitor system, the blind spot monitor indicator, which is provided on the outer rear view mirror, illuminates*1 or blinks*2 when a vehicle running parallel enters the blind spot detection area. This informs the driver that a vehicle is approaching, thus assisting with safety confirmation when changing lanes.
The blind spot monitor system consists of 2 blind spot monitor sensors, a steering sensor, outer rear view mirror assemblies LH and RH, a warning cancel switch assembly, a combination meter assembly and speed sensors.
This system performs control using the 2 blind spot monitor sensors.
*1: When a vehicle has entered the blind spot detection area.
*2: When the turn signal switch is operated with a vehicle in the blind spot detection area.
| *1 | Blind Spot Monitor Indicator | - | - |
| *a | Blind Spot Detection Area | - | - |