Home › General › CHASSIS › STEERING
NM27L0U _V1 General _050239 CHASSIS _0244925 STEERING UN GENERAL/CONTROL/DETAILS F

CHASSIS  STEERING  GENERAL/CONTROL/DETAILS  STEERING COLUMN  


Manual Tilt and Telescopic Mechanism


a.

The manual tilt and telescopic mechanism allows adjustment of the steering wheel position in the vertical and longitudinal (extending and retracting) directions through lever operation. This provides the driver with the most comfortable driving position.

i.

The tilt and telescopic mechanism is locked using the tilt and telescopic lever.


ii.

The tilt adjustment range is 6°.


iii.

The telescopic adjustment range is 40 mm (1.58 in.).

Tilt Adjustment Range
X131297C01
4.885,0.708 5.104,0.938 0.219,0.229 10 false *a 4.99,0.906 5.208,1.135 0.219,0.229 10 false *b
*a 3° *b 3°


Telescopic Adjustment Range
X131298C01
4.333,1.969 4.583,2.219 0.25,0.25 10 false *a 5.156,1.594 5.427,1.833 0.271,0.24 10 false *b
*a 20.0 mm (0.79 in.) *b 20.0 mm (0.79 in.)





Power Tilt and Power Telescopic Mechanism


a.

General

i.

The power tilt and power telescopic system consists of the tilt and telescopic ECU, tilt and telescopic manual switch, tilt motor, and telescopic motor.


ii.

The tilt and telescopic ECU controls this system.

System Diagram
X131299E01
0.552,3.438 1.073,3.771 0.521,0.333 10 false DLC3 2.51,3.229 3.969,3.99 1.458,0.76 10 false Main Body ECU (Driver Side Junction Block) 1.417,3.677 2.385,4.063 0.969,0.385 10 false CAN (V1 Bus) 4.115,3.531 5.188,3.917 1.073,0.385 10 false CAN (MS Bus) 5.521,4.031 6.708,4.406 1.188,0.375 10 false Memory Switch 5.677,3.24 6.552,3.625 0.875,0.385 10 false Mirror ECU 5.479,2.458 6.719,2.865 1.24,0.406 10 false Driver Seat ECU 4.656,1.021 6.865,1.417 2.208,0.396 10 false Tilt and Telescopic Manual Switch 5.375,0.26 6.625,0.615 1.25,0.354 10 false Ignition Switch 3.219,1.104 3.927,2.438 0.708,1.333 10 false Tilt and Telescopic ECU 1.073,0.917 2.083,1.281 1.01,0.365 10 false Position Sensor 0.323,0.271 1.021,0.646 0.698,0.375 10 false Tilt Motor 0.229,1.615 1.385,2 1.156,0.385 10 false Telescopic Motor 1.479,2.271 2.49,2.635 1.01,0.365 10 false Position Sensor

Layout of Main Components
X131300C01
1.667,1.281 1.063,0.583 true 2.417,1.208 2.052,0.375 true 3.021,1.844 4.177,0.458 true 4.677,4.031 4.229,3.313 true 0.833,2.125 2.021,1.625 true 0.885,3.417 1.531,2.906 true 0.563,1.125 1.688,1.375 true 1.927,0.198 2.156,0.417 0.229,0.219 10 false *1 0.896,0.438 1.094,0.646 0.198,0.208 10 false *2 0.396,1.021 0.615,1.323 0.219,0.302 10 false *3 0.656,2.042 0.865,2.281 0.208,0.24 10 false *4 0.74,3.417 0.979,3.635 0.24,0.219 10 false *5 4.667,4.042 4.927,4.26 0.26,0.219 10 false *6 4.188,0.302 4.438,0.552 0.25,0.25 10 false *7
*1 Tilt and Telescopic ECU *2 Mirror ECU
*3 Memory Switch *4 Main Body ECU (Driver Side Junction Block)
*5 Driver Seat ECU *6 Tilt and Telescopic Manual Switch
*7 DLC3 - -


Steering Column Assembly
X131301C01
3.271,0.708 3.573,0.406 true 3.167,2.083 2.885,1.646 true 5.542,2.198 5.781,1.802 true 6.458,3.417 6.104,2.927 true 3.583,0.281 3.813,0.531 0.229,0.25 10 false *1 5.771,1.615 6.052,1.865 0.281,0.25 10 false *2 6.448,3.406 6.688,3.635 0.24,0.229 10 false *3 2.167,1.708 2.427,1.969 0.26,0.26 10 false *a 4.99,3.438 5.229,3.708 0.24,0.271 10 false *b 3.125,2.073 3.354,2.313 0.229,0.24 10 false *2
*1 Telescopic Motor
·

Motor

·

Position Sensor


*2 Tilt Motor
·

Motor

·

Position Sensor


*3 Tilt and Telescopic ECU - -
*a Top View *b Bottom View




b.

System Control

i.

This system has the following control functions, thus providing excellent ease of operation and entry/exit.

Control Outline
Manual The tilt and telescopic positions can be adjusted using the tilt and telescopic manual switch.
Automatic* Auto Away The steering wheel automatically tilts up and retracts all the way when the ignition switch is changed from ACC or ON to OFF.
Auto Return When the ignition switch is changed from OFF to ACC or ON, the steering wheel automatically returns to the previous position which was set before the ignition switch was turned OFF.
Memory 2 steering wheel positions can be memorized, allowing different positions to be restored by the memory system.
Fail-safe When the tilt and telescopic ECU detects a malfunction in the power tilt and telescopic system, the ECU switches to a fail-safe mode.
Diagnosis When the tilt and telescopic ECU detects a malfunction in the power tilt and telescopic system, the ECU stores the malfunction data inmemory.

HINT:

*: Customization settings can be changed.



ii.

Manual Control

·

A stepless tilt adjustment allows the steering wheel to be tilted 6° vertically, and the telescopic mechanism allows it to be moved in and out 40 mm (1.58 in.).


X131302C01
3.031,0.604 3.302,0.802 0.271,0.198 10 false *a 3.146,0.813 3.396,1.052 0.25,0.24 10 false *b 2.031,2.208 2.323,2.469 0.292,0.26 10 false *c 5.708,1.792 5.938,2.042 0.229,0.25 10 false *d 6.49,1.448 6.76,1.688 0.271,0.24 10 false *e 5.156,2.208 5.438,2.448 0.281,0.24 10 false *f
*a 3° *b 3°
*c Tilt Adjustment Range *d 20 mm (0.79 in.)
*e 20 mm (0.79 in.) *f Telescopic Adjustment Range



iii.

Fail-safe

·

When the tilt and telescopic ECU detects a malfunction in the power tilt and telescopic system, the ECU changes the control mode to a fail-safe mode as follows:

Detection Item Fail-safe
Tilt Position Sensor or Tilt Motor Circuit Malfunction The tilt operation is suspended.
Telescopic Position Sensor or Telescopic Motor Circuit Malfunction The telescopic operation is suspended.
ECU Power Source Circuit Malfunction The tilt and telescopic operations are suspended.

·

The table below shows operations that are possible even when there is a problem with communication among ECUs related to the tilt and telescopic ECU and the power tilt and telescopic system.

Operation ECU or Switch for which Communication is Lost
Main Body ECU (Ignition Signal) Driver Seat ECU Mirror ECU Related ECU and Switch
Manual X* ○ ○ X*
Automatic Away X ○ ○ X
Automatic Return X* ○ ○ X*
Memory X X X X
Recall X* X X X


HINT:

○ : Possible

X: Not possible

*: When the power (ignition switch signal) for the tilt and telescopic ECU is on, the operation is possible. When it is off, the operation is not possible.



iv.

Diagnosis

·

If the tilt and telescopic ECU detects a malfunction in the power tilt and telescopic system, the ECU stores the malfunction data in memory. Then, by connecting a Techstream to the DLC3 terminal, the DTCs (Diagnostic Trouble Codes) can be accessed and an active test can be performed to test the operation of the tilt motor and the telescopic motor. For details, see the Repair Manual.