General
The daytime running light system is designed to automatically illuminate the front turn signal lights, during the daytime to keep the vehicle highly visible to other vehicles.
The daytime running light system is controlled by the main body ECU and flasher relay.
This system is enabled when the conditions given below are met.
Ignition switch is ON.
Parking brake switch is OFF.
Light control switch is in the AUTO position. (The DRL will operate until the automatic light control system illuminates the headlights.)*1
Light control switch is in the OFF or AUTO position. (The DRL will operate until the automatic light control system illuminates the headlights.)*2
Engine speed signal is input (Engine Running Condition).
Lo beam is not ON.
*1: Except for optional destination package models for Canada
*2: Models for optional destination package for Canada
System Diagram
Layout of Main Components
| *A | Models with Fog Light | *B | Models without Fog Light |
| *C | Except for optional destination package models for Canada | *D | Models for optional destination packagefor Canada |
| *1 | ECM | *2 | Headlight Unit
·
Turn Signal Light |
| *3 | Light Control Switch | *4 | FLASHER Relay |
| *5 | Main Body ECU (Driver Side Junction Block) | *6 | Parking Brake Switch |