DESCRIPTION
The automatic air conditioning using multi-zone automatic climate control and neural network control is standard equipment.
A multi-zone automatic climate control independently regulates the outlet air temperatures for the following 4 zones: the driver seat, the front passenger seat, the right side of the rear No. 1 and No. 2 seats, and the left side of the rear No. 1 and No. 2 seats. This offers comfortable space for all occupants.
For further comfort enhancement for rear passengers, the rear air conditioning unit is provided.
The air conditioning system has the following features:
| Item | Feature |
|---|---|
| High Performance | ·
Neural network control is used so passengers can control the air conditioning accurately for maximum comfort. ·
The up/down independent temperature control is used to achieve further comfort. The up/down independent temperature control adjusts the difference in temperature of the air blown over the upper body and lower body based on signals from the solar sensor. ·
Automatic FOOT/DEF mode control is used to improve defroster performance. ·
The sub-cool accelerator system has been provided. This system consists of inner and outer pipes, and is capable of improving the cooling performance because of its effective heat exchanging design. ·
A pollen removal type, which has a pollen removal effect, is used as the clean air filter. ·
The blower control has 9 steps to allow precise control. |
| Lightweight | A bus connector with a built-in IC is used in a lightweight wire harness design to allow a reduced number of wires. The use of this connector means that pulse pattern type servomotors are used. |
| Others | The following parts are used to ensure high cooling performance while achieving a compact and lightweight construction.
·
Semi-center location air conditioning unit ·
Revolutionary super-slim Structure (RS) evaporator ·
Straight Flow Aluminum (SFA)-II heater radiator ·
Multi-Flow (MF)-IV sub-cool condenser |